The world of bike mechanics can be a minefield for some riders and can be very expensive if you aren’t sure how to fix certain things. As a general rule of thumb, if you don’t know what you’re doing, it’s best leaving it to a professional to fix as they will both have the tools and the know-how.
Disc brakes have been around on mountain bikes since the mid 1990’s, however it is only recently that they have started to make an appearance on bikes with drop handlebars. It was firstly on cyclocross bikes, but even skinny tyred road bikes are starting to get them.
We have a few emails regarding gear hangers breaking/snapping a year, sometimes within weeks of receiving the bike usually after a few months/years of riding. Gear hangers are not a part that is usually covered under warranty and unless this the result of a crash then having them snap on you can generally be avoided. So for those people who are not sure what these are, or those who are buying their first bike and want to avoid the inconvenience of this, and a gear hanger breaking mid ride is pretty inconvenient, here is all the information I have on them and how to preserve their life as long as possible.
How they fit and what they do!
Gear hangers, or replaceable dropouts as they are otherwise known, are designed to be replaceable. They are usually made of alloy and will break under extreme stress in order to save your frame from being damaged. This can be the result of a crash, mis-shift or most usually simply being in the wrong gear when the chain and derailleur are under the most load either when the road goes upwards sharply or setting off from a standing/stationary start.
All the hangers for our bikes are of the cast alloy type and attach to the frame using either one, two or in some cases three countersunk bolts. The mech itself then attaches to the hanger. There are many different types of hangers and you usually find that each model of frame will have a specific one unique to it. This can sometimes change year by year, which doesn’t make things easy when trying to source a replacement.
Why do they break and how to avoid it! (Overshifting)
As previously mentioned hangers are made from a soft metal designed to break under extreme stress, this may sound a bit strange, but the reasons for this are to protect the more expensive parts of the bike firstly the rear derailleur and then frame, they are if you like the ‘weakest link’ on a bike’s drivetrain. A broken rear mech, although dependent on which one, can be relatively expensive and a bit annoying. It is nothing however compared to the cost of replacing the frame.
There are a few reasons why they break aside from crashes, which are usually pretty much unavoidable. The most common on new bikes is usually however down to rider error. Either being in the wrong gear combination for the terrain or when starting off, i.e. the big ring on the chainset paired with the biggest sprocket on the cassette, or trying to change gear when the load on the chain and gears is at its greatest on steep inclines.
Other reasons can be an incorrectly fitted or worn chain, a chain that is too short for the chainset/cassette combination fitted, debris in the chain or derailleur and incorrectly set up gears can also cause undue stress on the hangers.
Dos and Don’ts!
Do keep your chain well maintained. Clean and lube regularly. The same goes for your derailleur, cassette and chainset.
Do check your chain regularly for stiff links or possible bent links.
Do ensure that after fitting any new parts to the bikes drivetrain that you check the gears are correctly set up – reset and adjust if necessary.
And lastly Do make sure that you are in the right gear for starting off and climbing, always start off in the small/inner ring at the front, and ensure you are in a suitable gear combination before the road ramps up on a steep climb.
Hopefully then your hanger will last as long as you have the frame and you won’t have to try and limp home if one does snap on you!
Before heading out on a ride there are a few nutrition fail safes you might want to consider.
For shorter rides of less than 90 minutes it is probable that your body will be well enough fuelled, that is as long as you have eaten well prior to the ride. In general a high carbohydrate meal with a medium to low Glycemic Index (porridge and/or eggs with rye bread are good examples) 2-3 hours before the ride followed by a snack such as a banana, High 5 energy bar, small flapjack/cake or a handful of Powerbar Sport Energize Shots 30-45 minutes before you start should suffice.
Continue reading On Bike Refuelling
If I had a pound for every time someone’s asked me that when advising on them on the specification for their bike build…I could possibly have started my own Pro team or at least opened my own bike shop!!
Unfortunately there is no simple answer, everyone is different with a different body shape and even more unfortunately when you do decide on one you won’t have any idea until you’ve tried it. I know plenty of riders that swear by a certain saddle and will not fit anything else to any of their bikes, I would be very wary however of listening to other riders’ opinion, plenty will have a recommendation but saddles are an entirely personal choice and finding the right one for you can be down to trial and error.